Awtad FZCO :: Enameled Copper Wire

Enameled Copper Wire is the core material in electric motor industryAs agent of ELS-CO we supply the following high quality enameled copper wires...

ELS - Products Code
Thermal class

ELS 180
H (180C)

ELS 200
H(>200C)

General
Description
Standard IEC
(including The following norms)

Diameters available
Technical Values
1.Thermal Values
Temprature index 20,000h acc to IEC 172

Cut Through temprature
min.° C
to IEC 851.6.4
ELS typical values for 0.20 - 0.80mm
Heat Shock min. °C acc to IEC 85.6.4
ELS typical values for 0.20 - 0.80mm

2. Electerical Values
Min. Breakdown voltage
(at room tem.)
for 0.20 - 0.80mm , Grade 1
ELS typical values for 0.20 - 0.80mm

3. Mechanical Values
Elongation min. acc. to IEC 815.3.3 for 0.20 0 - 0.80mm
ELS typical values for 0.20 - 0.80mm

Application

Polyesterimide
IEC 317-23, IEC 317-3, IEC 317-8

0.20-0.80mm

195 °C

265 °C

330-360 °C

200 °C
200-210 °C

1400-2500 V

5000-10000V

21%-28%
30%-38%

Solderable at high temperature .
Very good thermal and good chemical resistance.

Used in small motors, small transformers and automotive coils.

Theic - mod. Polyesterimide
IEC 317 -8

0.20-0.80mm

210C

300C

350-360C

200C
220-230C
1400-2500V

5000-10000V

21%-28%
30%-38%

High thermal properties
and good chemical resistance.

Used in motors, small motors and transformers

(ELS) Electrosim typical values are the result of various tests and represent average values.

Copper wire
Nominal diameter Conductor	Tolerances Conductor ±	Linear resistance /m at 20°C
mm	mm	min	max
0.90 0.100 0.112 0.125 0.140 0.160 0.180 0.200 0.224 0.250 0.280 0.315 0.355 0.400 0.450 0.500 0.560 0.630 0.710 0.800 0.900 1.000 0.120 1.250 1.400 1.600 1.800 2.000 2.240 2.500 2.800 3.150 3.550 4.000 4.500 5.000	0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.004 0.004 0.004 0.004 0.005 0.005 0.005 0.006 0.006 0.007 0.008 0.009 0.010 0.011 0.013 0.014 0.016 0.018 0.020 0.022 0.025 0.028 0.032 0.036 0.040 0.045 0.050	2.495 2.034 1.632 1.317 1.055 0.8122 0.6444 0.5237 0.4188 0.3345 0.2676 0.2121 0.1674 0.1316 0.1042 0.08462 0.06736 0.05335 0.04198 0.03305 0.02612 0.02116 (4) \| \| \| \| \| \| \| \| \| \| \| \| \|	2.900 2.333 1.848 1.475 1.170 0.8906 0.7007 0.5657 0.4495 0.3628 0.2882 0.2270 0.1782 0.1407 0.1109 0.08959 0.07153 0.05638 0.04442 0.03500 0.02765 0.02240 (4) \| \| \| \| \| \| \| \| \| \| \| \| \| \|

Standard enamelled wires
Minimum increase mm		Maximum overall diameter mm
Grade1	Grade2	Grade1	Grade2
0.008 0.008 0.009 0.10 0.011 0.012 0.013 0.014 0.015 0.017 0.018 0.019 0.020 0.021 0.022 0.024 0.025 0.027 0.028 0.030 0.032 0.034 0.034 0.035 0.036 0.038 0.036 0.040 0.041 0.042 0.043 0.045 0.046 0.047 0.049 0.050	0.015 0.016 0.017 0.019 0.021 0.023 0.025 0.027 0.029 0.032 0.033 0.035 0.038 0.040 0.042 0.045 0.047 0.050 0.053 0.056 0.060 0.063 0.065 0.067 0.069 0.071 0.073 0.075 0.077 0.079 0.081 0.084 0.086 0.089 0.092 0.094	0.105 0.117 0.130 0.144 0.160 0.182 0.204 0.226 0.252 0.281 0.312 0.349 0.392 0.439 0.491 0.544 0.606 0.679 0.762 0.855 0.959 1.062 1.184 1.316 1.468 1.670 1.8723 2.074 2.316 2.578 2.880 3.233 3.635 4.088 4.591 5.093	0.113 0.125 0.139 0.154 0.171 0.194 0.217 0.239 0.266 0.297 0.329 0.367 0.411 0.459 0.513 0.566 0.630 0.704 0.789 0.884 0.989 1.094 0.217 1.349 1.502 1.706 1.909 2.112 2.355 2.618 2.922 3.276 3.679 4.133 4.637 5.141

Self - bonding enamelled wires
Minimum increase mm		Maximum Overall diameter mm
Grade-1B	Grade-2B	Grade-1B	Grade-2B
0.020 0.020 0.022 0.024 0.026 0.027 0.029 0.031 0.033 0.036 0.037 0.039 0.041 0.043 0.045 0.048 0.049 0.052 0.054 0.057 0.060 0.063 0.064 0.065 0.067 0.070 0.072 0.074	0.027 0.028 0.030 0.033 0.036 0.038 0.041 0.044 0.047 0.051 0.052 0.055 0.059 0.062 0.065 0.069 0.071 0.075 0.079 0.083 0.088 0.092 0.095 0.097 0.100 0.103 0.106 0.109	0.117 0.129 0.143 0.158 0.175 0.197 0.220 0.243 0.270 0.300 0.331 0.369 0.413 0.461 0.514 0.568 0.630 0.704 0.788 0.882 0.987 1.091 1.214 1.346 1.499 1.702 1.905 2.108	0.125 0.137 0.152 0.168 0.186 0.209 0.233 0.256 0.284 0.316 0.348 0.387 0.432 0.481 0.536 0.590 0.654 0.729 0.815 0.911 1.017 1.123 1.247 1.379 1.533 1.738 1.942 2.146

1)On the table are not mentioned the intermediate diameters belonging to the R40 series, these diameters are manufactured
only on request.
2)For these tolerances are not fixed the relevant figures, for the acceptance only the linear resistance value are required.
3)Values not fixed.


Home :: Project Products :: Steel :: Reflective Sign Material :: Enameled Copper Wire :: Aluminium :: History :: Location :: Contact Us
2004 \| A Barobax Design for Awtad Freezone Company \| webmaster@awtad-fzco.com